24V constant voltage LED drivers

24V constant voltage LED drivers supply power to 24-volt LED strip lights and other compatible LED luminaires. Choose a driver rated for your total load and add a suitable power reserve.

How to select the right driver

Calculate your total LED strip power consumption (watts per metre × length), then select a driver approximately 20–30% higher than the total. For example, if your 24V LED strip consumes 18W/m and you need 2 metres (18W × 2m = 36W), choose a 50W 24V driver. The driver may exceed the load by more than 30%, but must never be lower.

Dimming and control options

Our range includes non-dimmable drivers as well as models compatible with TRIAC, DALI, 0–10V, 1–10V and Push-Dim systems. Browse our 24V LED strip lights to complete your installation.

83 products

Filter
MEAN WELL

Mean Well ELG-75-24DA-3Y DALI 24V LED power supply 75W IP67

€99,90
€99,90
MEAN WELL

Mean Well ELG-240-24DA-3Y DALI 24V LED Power Supply 240W IP67

€109,90
€109,90
MEAN WELL

Mean Well ELG-75-24A-3Y 24V LED Power Supply 75W IP67

€47,00
€47,00


Basic converters work on/off, ie with a normal light switch, lighting and turning off LED-Ribbon. If you dim LED-Ribbon, this must be taken into account when choosing a standard voltage source. RF and RF WIFI for dimming also select 24v too basic transformer (For dimming occurs in the receiver transformer and LED-Between the ribbon, on the secondary side, the transformer itself is not usually dimmed). If you are dimming triac or 1-10v then select Triac or 1-10V standard voltage source. Traditional fixed wall mimics such as Shneider Exxact UN400LED Triac dimmable power supply. Dali with transformers In addition to Dali's control LED-for tapes. Outdoor use moisture protected LED-In transformers.